Map your yard
We fetch a satellite image of your address and AI outlines your lawn, beds, driveway and trees. Drag any edge to refine.
AI irrigation design · built for DIY
Your entire sprinkler system, designed in minutes.
Drop in your address. We pull a satellite photo, map every foot of your lawn, place each head, route the pipe, and hand you a printable blueprint and parts list — with the price a pro would charge and exactly what you keep by doing it yourself.
- Free blueprint & parts list
- 3 buildable system options
- 50%+ typical savings vs. a pro
No signup & no card
Plan in ~5 minutes
$1,500–$3,000 typical savings
AI-reviewed parts lists
From satellite photo to shovel-ready plan
Four steps. No measuring tape, no guesswork, no contractor quote to wait on.
Place the heads
Heads land on your property line spraying inward — never the neighbor's yard — with arcs and rotors matched to each space.
Route & zone it
We size zones to your real water pressure and flow, then route the main and laterals around obstacles and under sidewalks.
Price & download
Get a printable blueprint with cut lengths, three parts lists, and the dollar amount you save installing it yourself.
A real design, running
Watch a real system water a real lawn
This isn't a mock-up — it's an actual design our engine produced: 29 heads across 8 zones covering 9,967 sq ft. Press play and watch each zone run in 3D, exactly like the controller will run it.
Interactive 3D — each zone waters in sequence with live spray. Your own design gets the same 3D preview.
Everything you need to plan it like a pro
Satellite + AI mapping
An overhead photo of your address with turf, beds, driveways and trees detected automatically — no tape measure required.
Smart head placement
Perimeter heads spray inward, interior heads fill the gaps, and each arc angle is tuned to its spot for even, edge-to-edge coverage.
Pressure & flow sizing
Enter your PSI and GPM and we split the yard into zones that actually run — adding a pressure regulator only when you need one.
Installer-grade blueprint
Main lines, laterals, valves and cut lengths in feet & inches — a drawing you can dig to, downloadable as a clean PDF.
Three parts lists
Budget, Balanced and Custom builds — every head, pipe, fitting, controller, backflow and rental, mixing kit sizes for the best value.
Real savings vs. a pro
See what an installer in your area would charge and how much you keep by doing it yourself — usually well over half.
Why DIY
A pro install is mostly labor. Keep it.
A professional in-ground system routinely runs $2,500–$5,000+ for an average yard — and most of that is the crew, not the parts. With a clear plan and a free weekend, that money stays in your pocket.
0
typical savings vs. hiring outA weekend
for a typical DIY install0
to design your full planDIY with a real plan vs. hiring a contractor
You get the same engineering a pro uses to quote the job — without the quote.
SprinklerBlueprint DIY
Hire a contractor
Up-front cost
Parts only
$2,500–$5,000+
Custom yard layout
AI-mapped
Yes
Wait for a quote
Instant
Days–weeks
Printable blueprint & parts list
Included
Rarely
Edit & re-plan anytime
Free
Change order
Savings calculator
What would your yard save?
Drag to your lawn size. Typical planning figures — your free plan prices your exact yard, parts and local labor rates.
Typical pro install
$3,950
crew labor + markup
Your DIY parts
$1,070
full bill of materials
You keep
$2,880
≈ 73% saved
Estimates from typical national ranges; hose-fed kits skip trenching entirely. Your plan shows exact numbers for your address.
Homeowners are skipping the contractor
Built for first-time DIYers and weekend warriors alike.
"I had a full blueprint and parts list in ten minutes. Installed it over a weekend and saved nearly three grand versus the quote I got."
"The zone sizing actually matched my water pressure — every head pops up strong. The blueprint made trenching obvious."
"I'm not handy, but the step-by-step plan and the shared link to ask my brother-in-law made it doable. Looks professional."
Illustrative experiences — finish a plan and rate it to see your review here.
Frequently asked questions
Is it really free?
Yes — designing your system costs nothing. We may earn a small affiliate commission if you buy parts through our links, at no extra cost to you.
Do I need to be handy?
If you can dig a shallow trench and connect push-fit tubing, you can install a DIY system. Hose-fed kits need no permanent plumbing at all.
How accurate is the yard mapping?
It's a strong AI starting point from satellite imagery — you fine-tune every boundary in seconds before placing heads.
Will the system work with my water pressure?
Enter your pressure and flow and we size the zones to match, adding a regulator automatically if your pressure is too high.
Can I edit my plan later?
Yes. Your design saves to a private link you can reopen anytime to change anything — the parts list and blueprint update automatically.
Map your yard in a few minutes.
Free blueprint, full parts list, and the exact amount you'll save.
Design my sprinkler system →